D9R

by monark-admin | Aug 11, 2023 | Brand New, Track Type Tractor

Full Specifications

Engine
Engine Model	Cat® 3408C
Flywheel Power	302 kW
Bore	137 mm
Stroke	152 mm
Displacement	18 l

Weights
Operating Weight	48784 kg
Shipping Weight	36154 kg

Transmission
1 Forward	3.9 km/h
2 Forward	6.8 km/h
3 Forward	11.9 km/h
1 Reverse	4.7 km/h
2 Reverse	8.4 km/h
3 Reverse	14.7 km/h
3 Forward – Drawbar Pull	218000 N
2 Forward – Drawbar Pull	400000 N
1 Forward.- Drawbar Pull	725000 N

Hydraulic Controls
Pump Type	Piston-type geared from flywheel
Pump Output – Implement	239 l/min
Tilt Cylinder Flow – Rod End Flow	137 l/min
Tilt Cylinder Flow – Head End Flow	167 l/min
Bulldozer Relief Valve Setting	26200 kPa
Tilt Cylinder Relief Valve Setting	19300 kPa
Ripper – Lift – Relief Valve Setting	26200 kPa
Ripper – Pitch – Relief Valve Setting	26200 kPa

Undercarriage
Shoe Type	Extreme Service
Width – Shoe	610 mm
Shoes/Side	43
Pitch	240 mm
Ground Clearance	596 mm
Track Gauge	2250 mm
Length – Track on Ground	3470 mm
Ground Contact Area	4.24 m²
Track Rollers/Side	8
Grouser Height – Extreme Service (ES)	84 mm
Note	Positive Pin Retention Track.

Service Refill Capacities
Fuel Tank	889 l
Cooling System	163 l
Engine Crankcase*	45.5 l
Power Train	164 l
Final Drive – Each	15 l
Roller Frames – Each	45 l
Pivot Shaft Compartment	30 l
Hydraulic Tank	77.2 l
Note	* With oil filters.

Blades – 9SU
Ground Clearance	1422 mm
Height	1934 mm
Weight* – Without Hydraulic Controls	6863 kg
Capacity – SAE J1265	13.5 m³
Total Operating Weight** – With Blade and Single-Shank Ripper	48784 kg
Width – Over End Bits	4310 mm
Digging Depth	606 mm
Maximum Tilt	940 mm
Note (1)	* Includes blade tilt cylinder.
Note (2)	** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.

Blades – 9U
Ground Clearance	1422 mm
Maximum Tilt	1014 mm
Width – Over End Bits	4650 mm
Weight* – Without Hydraulic Controls	7388 kg
Digging Depth	606 mm
Height	1934 mm
Total Operating Weight** – With Blade and Single-Shank Ripper	49392 kg
Capacity – SAE J1265	16.4 m³
Note (2)	** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.
Note (1)	* Includes blade tilt cylinder.

Blades – 9U
Ground Clearance	1422 mm
Height	mm
Weight* – Without Hydraulic Controls	4990 mm
Capacity – SAE J1265
Total Operating Weight** – With Blade and Single-Shank Ripper
Width – Over End Bits
Digging Depth
Maximum Tilt
Note (1)	* Includes blade tilt cylinder.
Note (2)	** Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, 100% fuel, ROPS, FOPS cab, Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes, and operator.

Rippers – Adjustable Parallelogram – Multi Shank
Number of Shank Holes	2
Overall Beam Width	1330 mm
Weight – With One Shank	4153 kg
Maximum Penetration Force – Shank Vertical	154 kN
Pry-Out Force – Multi-Shank Ripper with One Tooth	361 kN
Maximum Penetration – Standard Tip	798 mm
Total Operating Weight* – With SU-Blade and Ripper	48221 kg
Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole	879 mm
Note (1)	* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Note (2)	+Includes (1) shank, add 347 kg for each additional shank.

Rippers – Adjustable Parallelogram Single Shank Standard / Deep
Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole	882 mm/817 mm (34.7 in/32.2 in)
Total Operating Weight* – With SU-Blade and Ripper	48784 kg
Pry-Out Force	332 kN/331 kN (74,637 lbf/74,412 lbf)
Weight – With One Shank	4293 kg/4420 kg (9,464 lb/9,744 lb)
Number of Shank Holes	3-Mar
Maximum Penetration – Standard Tip	1231 mm/1727 mm (48.5 in/68 in)
Note (1)	* Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator.
Overall Beam Width	NA
Maximum Penetration Force – Shank Vertical	158 kN/172 kN (35,520 lbf/38,667 lbf)
Note (2)	Single-shank ripping arrangement weight includes pin puller.

Winches
Winch Model	PA140VS
Weight*	1790 kg
Oil Capacity	15 l
Increased Tractor Length	557 mm
Drum Width	320 mm
Wire Cable Diameter – Recommended	28 mm
Wire Cable Diameter – Optional	32 mm
Maximum Drum Capacity – Recommended Cable Length	78 m
Maximum Drum Capacity – Optional Cable Length	62 mm
Wire Cable Ferrule Size – Outside Diameter	60 mm
Wire Cable Ferrule Size – Length	70 mm
Note (2)	Variable speed, hydraulically driven, dual braking system, three‑roller fairlead.
Note (1)	* Weight: Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).

Benefits

MORE HORSEPOWER	Proven Cat C15 engine gives you more horsepower to get the job done.
MOVE UP TO13% MORE MATERIAL PER PASS	The largest Semi-Universal blade in the size class helps you move more material with every pass.
SAVE TIME AND MONEY	Boost your productivity with factory installed technologies like Cat GRADE with Slope Assist, which automatically maintains blade position without GPS.