Full Specifications
| Weights | |
|---|---|
| Operating Weight – With SE34 VT | 8200 kg |
| Tractor Weight | 6600 kg |
| Operating Weight – With SE34 V | 8000 kg |
| Operating Specifications | |
|---|---|
| Standard Paving Range | 1.75 – 3.42 m (5.6′ – 11.1′) |
| Maximum Paving Width | 4 m |
| Minimum Paving Width | 700 mm |
| Maximum Paving Speed | 17861 m/min |
| Maximum Travel Speed | 16 km/h |
| Dimensions | |
|---|---|
| Wheel Base | 1950 mm |
| Truck Entry Width | 3150 mm |
| Truck Entry Height | 547 mm |
| Transport Height | 2645 mm |
| Transport Length | 5029 mm |
| Operating Width | 3180 mm |
| Operating Height – With Canopy | 3415 mm |
| Operating Length | 5047 mm |
| Transport Width | 1938 mm |
| Engine | |
|---|---|
| Gross Power | 55 kW |
| Engine Model | C3.3B |
| Service Refill Capacities | |
|---|---|
| Fuel Tank | 110 l |
| Washdown Spray Tank | 28 l |
Benefits
| HIGH EFFICIENCY POWERTRAIN | ADVANCED ECO-MODE ADVANCED ECO-MODE MODIFIES ENGINE SPEED TO SAVE FUEL AND REDUCE SOUND LEVELS, LEADING TO LOWER OPERATING COSTS AND BETTER WORK SITE COMMUNICATION. MORE TRACTION LARGE, HYDROFLATED, 365/80 R20 DRIVE TIRES COMBINE WITH THE FRONT WHEEL ASSIST OPTION TO DELIVER 20% MORE TRACTION FOR THOSE TOUGH WORKING CONDITIONS THAT INCLUDE HEAVY LOADS AND SOFT BASE MATERIALS. RESPONSIVE STEERING AND TRAVEL OPTIONS THREE STEERING/TRAVEL MODES PROVIDE ALTERNATIVE CONTROL OPTIONS FOR PAVING, TRAVELING, AND MANEUVERING AROUND THE JOB SITE. PAVE MODE ENABLES A PAVING SPEED UP TO 61 MPM (200 FPM), WHILE TRAVEL MODE OFFERS A QUICK SPEED OF 16 KPH (10 MPH). MANEUVER MODE OFFERS TIGHT TURNING CAPABILITY FOR EASIER POSITIONING IN COMPACT AREAS. |
| AUTOMATION ENHANCES MATERIAL FLOW | CONSISTENT STARTING CONSISTENT PAVING STARTS CAN LEAD TO SMOOTHER PAVEMENT. AT THE BEGINNING OF EACH PASS, THE AUTO-FILL MATERIAL FEED SYSTEM ACTIVATES THE AUGERS AND CONVEYORS AND MOVES MATERIAL ACROSS THE FACE OF THE SCREED UNTIL THE MATERIAL REACHES THE SET POINTS OF THE FEED SENSORS. THIS CONSISTENCY ALLOWS THE OPERATORS TO QUICKLY FINE TUNE THE FEEDER SYSTEM SPEEDS FOR SMOOTH MATERIAL FLOW IN FRONT OF THE SCREED. SIMPLE ACTIVATION TECHNOLOGY ENHANCEMENTS OPTIMIZE OPERATOR PERFORMANCE. THE MATERIAL FEED SYSTEM CAN BE ACTIVATED WITH A SINGLE SWITCH FOR QUICK SETUP. EACH AUGER AND EACH CONVEYOR CAN ALSO BE ACTIVATED INDIVIDUALLY IN MANUAL OR AUTOMATIC MODE WHEN CERTAIN CONDITIONS EXIST. ADVANCED HOPPER CONTROL ADVANCED HOPPER CONTROLS ENHANCE OPERATOR EFFICIENCY BY ALLOWING MORE FOCUS TO BE ON THE WORK SITE. THE ADVANCED CONTROL ACTIVATES THE HOPPER FOLD OR RETRACT FUNCTION WITH A SINGLE TOUCH. THE OPERATOR DOESN’T HAVE TO PRESS THE SWITCH THROUGH THE ENTIRE TRAVEL CYCLE. CLEANOUT AND WARM-UP MODE SIMPLE PREPARATION AND CLEANING CAN SAVE TIME. THE CLEANOUT AND WARM-UP MODE ACTIVATES THE AUGERS, CONVEYORS, AND TAMPER BARS (IF EQUIPPED) AT SLOW SPEED ENABLING FOR THE APPLICATION OF INHIBITORS THAT HELP PREVENT MATERIAL BUILD-UP. |
| COMFORT AND VISIBILITY | WATER RESISTANT CONSOLES PROVIDING RELIABLE MACHINE CONTROL IN INCLEMENT WEATHER CAN BE A CHALLENGE. THE WATER RESISTANT CONSOLES PROVIDE EXCELLENT RELIABILITY AND MEET IP67 COMMON WATER SUBMERGENCE RATINGS. THE SWITCHES HAVE BEEN TESTED TO ONE MILLION CYCLES WITHOUT FAILURE. IF A FAILURE DOES OCCUR, GROUPED COMPONENTS ARE SERVICEABLE AND IT’S NOT NECESSARY TO REPLACE THE ENTIRE CONSOLE. EASY RECOGNITION AND INTERACTIVE DISPLAYS EASY RECOGNITION AND RELIABLE CONTROLS HELP OPERATORS PERFORM MORE EFFICIENTLY. THE RAISED SWITCH DESIGN AND ADJUSTABLE BRIGHTNESS CONTROLS SIMPLIFY NIGHTTIME OPERATION, WHILE THE TOUCH SCREEN LCD DISPLAYS ALLOW FOR CUSTOMIZATION. ALSO, MULTIPLE LANGUAGE OPTIONS AND LARGE SYMBOLS ACCOMMODATE CREW DIVERSITY. |
| APPLICATION VERSATILITY | FAST HEATING SCREEDS THE ELECTRIC HEAT CONTROL PANEL UTILIZES TOUCH-PAD TECHNOLOGY AND LED INDICATOR LIGHTS TO CREATE A USER-FRIENDLY INTERFACE. THREE PRE-SET TEMPERATURE SETTINGS FOR EACH SCREED SECTION ENSURE EVEN-HEAT DISTRIBUTION AND MANUAL ADJUSTMENTS PROVIDE OVERRIDE CAPABILITY. ON-BOARD DIAGNOSTICS ENABLE THE OPERATOR TO VERIFY FAULT INDICATORS. TAMPER BAR SCREED THE SE34 VT COMBINES VIBRATORY SCREED PLATES AND TAMPER BARS TO OPTIMIZE DENSITY BEHIND THE SCREED. VARIABLE SPEED SETTINGS FOR TAMPING SPEED AND VIBRATORY SPEED HELP FINE TUNE THE SYSTEM TO MAXIMIZE MAT QUALITY. |
| SIMPLIFIED SERVICE | QUICK-CHANGE HEATING ELEMENTS THE SCREED PLATE HEATING ELEMENTS EASILY SLIDE OUT FOR FAST REPLACEMENT IN THE EVENT THAT A FAILURE OCCURS. TEMPERATURE SENSOR MONITORING THE TECHNOLOGICALLY ADVANCED MONITORING SYSTEM AUTOMATICALLY KEEPS THE SCREED PLATES HEATING IF A TEMPERATURE SENSOR FAILS. |